TP601 is a weather-retardant, impregnated, open-cell, polyurethane soft foam, enclosed before use in a polypropylene film with a bonding adhesive on one side for fixing.
TP601 is an impregnated, pre-compressed foam sealing tape, encapsulated before use in a tear-off, polypropylene film with a bonding adhesive on one side for installation.
The tape is intended for the external, recessed perimeter sealing of windows and doors with the same high performance characteristics as TP600. The tear-off, encapsulating film permits the post-installation expansion of the foam strip, thus ensuring an effective weather seal.
- Factory or site application with activation at any time
- 600 Pa weather resistance
- Applied before frame installation
- No hazardous waste or clean up
• Adhesion surfaces must be free from oil, grease, dust and
|Characteristics||Units / Test Method||Classification/Result|
|Construction Class||DIN 4102||B2|
|Standard Construction Material Compatibility||DIN 52453||Compatible|
|Film Thickness||30 +/-5 µ|
|Driving Rain Resistance||EN1027||600 Pa minimum|
|Water Vapour Permeability||sd value <0.5 m|
|Application Temperature||The tape should be applied to the window frame before installation at temperatures above +10°C to ensure satisfactory adhesive tack.|
|Service Temperature||-30°C to +90°C|
|UV Resistance||The polypropylene activation film must be removed within 3 months of installation otherwise this may be difficult to remove.|
|Storage||Store rolls horizontally and in original carton between +0°C and +20°C in dry conditions and away from direct sunlight|
|Shelf Life||18 months when stored as recommended in original unopened containers.|