Need some help with our products or can't find what you're looking for ?

PU700
Multi-Use Construction Adhesive

PU700 is a rapid curing polyurethane foam adhesive which can be applied by gun or straw.

PU700 is an innovative high-strength solution for bonding a wide variety of applications.

An innovative solution for bonding bricks / blocks that can replace traditional mortar
High performance wood and joinery adhesive
Ideal for bonding a wide range of construction materials including steel and foam
Rapid curing – joint can be handled / maneuvered within 10 minutes, and cures fully within 24 hours
Easy to use: no mixing, no water, no dust, no specialist tools or equipment required
Suitable for indoor or outdoor use
Excellent long-term resistance to seawater, limewater, dilute acids and caustic solutions

Protective Equipment

USE IN WELL VENTILATED CONDITIONS and ensure all recommended protective equipment is worn during handling & use of this product. For full recommendation, refer to safety data sheet.

Preparation

IMPORTANT: At least one surface should be porous.
Always carry out a test to confirm compatibility prior to use.
Protect floor coverings with paper or a plastic film.
The surfaces must be dry, solid, stable and capable of carrying the load of the panels to be installed.
Remove all loose particles, dust and grease.
A speedier cure can be attained by moistening the substrates if needed.

Application

Shake the canister vigorously at least 20 times. Remove the protective cap and screw onto the illbruck PU foam gun or straw.
Apply a bead of PU700 along the horizontal and vertical sections to be bonded. Keep the end of the nozzle just off the surface.
For best results always work with the canister in a vertical position and keep the valve pointed downwards.

For full details, refer to technical data sheet.

Characteristic	Standard	Result
Composition		Polyurethane Foam
Conformance	EN 204/205	D4
Fire Class	EN 13501-1	Class E, B2
Open Time	3 cm in width at 23°C and 50% RH	8 minutes
Tack Free Time	3 cm in width at 23°C and 50% RH	8 minutes
Loading Time		24 hours
Tensile Strength	FEICA TM 1018	10,500 kPa
Application Temperature* *Application temperature of -5°C applies only if the surface is dry		Canister: +10°C to +30°C Ambient: -5°C to +35°C
Service Temperature		Short Term: -40°C to +130°C Long Term: -40°C to +90°C
Storage		Store in shaded, dry conditions between +10°C and +25°C Store canisters upright
Shelf Life		12 months when stored as recommended in original, unopened containers