This website uses cookies and other tracking technologies (also known as pixels or beacons) to aid your experience (such as viewing videos), as well as “performance cookies” to analyze your use of this website and to assist with marketing efforts. If you click the "Accept All Cookies" button or continue navigating the website, you agree to having those first and third-party cookies set on your device. If you do not wish to accept cookies from this website, you can choose to not allow cookies from this website by updating your browser preferences. For more information on how we use Cookies, please read our Privacy Policy.
SP350 has been developed to bond materials to floor, wall and ceiling, where the extremely high initial strength of the product is very useful for this high performance adhesive.
Usage/Purpose
SP350 is ideal for a vast range of interior & exterior applications and may be applied to damp substrates. Applications include:
Fixing Aluminium and PVCu nosings and extrusions to concrete and wooden stairs.
Carpet grippers to most sub floors without using tacks or nails.
Most types of wall cladding, direct wall studding, internal wall surfaces or timber battens.
High initial grab and rapid development of final bond
Formulation is solvent free, very low odour, and chemically neutral
Instant grab can minimise the need for additional clamping or other mechanical supports
Good resistance to light, weather and ageing - suitable for internal and external applications
Usage Guidelines
May be applied to damp substrates.
For optimum adhesion, surfaces should be clean, dry, sound and free of contamination.
Always carry out a test to confirm compatibility prior to use.
Roughen non-porous surfaces.
On materials such as glass, aluminium, ceramics, lacquered wood, epoxy and polyester no primer is required. For other materials, please contact tremco illbruck Technical Services.
Technical data
Property
Test Method
Results
Specific Gravity
DIN 52451-A
1.5
Consistency
EN 27390 20 mm profile
0 mm , non-sagging
Film Formation Time
Approx. 15 min. at 23°C/50% r.h.
Cure Rate
Approx. 3.5 mm/1st day
Volume Shrinkage
DIN 52451
3.4%
Modulus at 25% Elongation
DIN 53504 S2
0.8 N/mm²
Modulus at 100% Elongation
DIN 53504 S2
1.5 N/mm²
Tensile Strength
DIN 53504 S2
Approx. 3.0 N/mm²
Elongation at Break
DIN 53504 S2
Approx. 470 %
Module at 100 % Elongation
DIN EN ISO 8339 Method A
Approx. 1.3 N/mm²
Tensile Strength
DIN EN ISO 8339 Method A
Approx. 2.0 N/mm²
Elongation at Break
DIN EN ISO 8339 Method A
Approx. 350%
Recovery
DIN EN ISO 7389 Method B
60%
Shore A Hardness
DIN 53505
55°
Application Temperature
+5°C up to +40°C
Service Temperature
-40°C up to + 90°C
Storage
Store in shaded dry conditions between +5°C and +25°C.
Shelf Life
12 months when stored as recommended in original unopened containers.
