illbruck PU700 masonry adhesive

Tremco illbruck is launching illbruck PU700 masonry adhesive, a rapid curing PU foam adhesive developed specifically for the installation of brick, stone, blocks and a range of other construction materials.
Clean, quick and easy to apply, illbruck PU700 offers a real alternative to traditional mortar.  

illbruck PU700 masonry adhesive is a completely unique polyurethane adhesive that is set to replace traditional mortar-based adhesives in the construction of brickwork, blockwork and installation of similar masonry materials.
This high quality adhesive has excellent long-term resistance to weathering, water, sea water, acids and solvents.  

Tested for compatibility with a vast range of construction materials, illbruck PU700 is a ready-to-use product which is quick and easy to apply.
With the hand held applicator gun which ensures accurate control and clean application, the Tremco illbruck adhesive is a ready-to-use product which is quick and easy to apply.  

It sets within 10 minutes to provide a very high strength bond several times stronger than the masonry material itself, and is equally suitable for internal and external use.  

Easy to use
No need to spend time mixing sand and cement. Simply screw the canister onto the handheld gun and PU700 is ready to use.
A 25 kg bag of mortar takes more than 8 litres of water to mix. With illbruck PU700 all components are inside the single handheld canister
The easy-to-use applicator provides accurate control, ensuring that you only apply adhesive where you need it.
illbruck PU700 allows you to only use what you need. After use, the canister can be left on the gun for future applications.  

illbruck PU700 masonry adhesive really does take the work out of blockwork.